Propworx

Iron Man Crushed Mark III Helmet
Lot #2 of Iron Man Prop and Costume Auction

Production-made rotocast resin Mark III helmet painted red and gold. Painted to look distressed and crushed. Item measures approximately 6″ × 12″ × 8″.

Iron Man Mark III Ab Plate and Lower Torso Armor
Lot #3 of Iron Man Prop and Costume Auction

Production-made wearable rubber Mark III abdominal/back plate with black suspenders held on with safety pins. Painted red. Item measures approximately 13″ × 18″.

Iron Man Hero Mark III Left Hand
Lot #5 of Iron Man Prop and Costume Auction

Production-made wearable foam Mark III left hand painted red. Item has been form fitted to the actors' hand using fabric and foam. The hard armor parts are made out of fiber-glass. Item measures ...

Iron Man Mark III Hero Right Hand Armor
Lot #7 of Iron Man Prop and Costume Auction

Production-made wearable Mark III right hand armor piece painted red. The hard armor pieces were made out of fiber-glass with a white sticker on the palm for CGI reference. Armor is heavily distressed...

Iron Man Molded Arm Parts
Lot #11 of Iron Man Prop and Costume Auction

Iron Man Mark III suit arm sections made from fiberglass. Pieces are unfinished but labeled. Features right and left shoulder, bicep, elbow and forearm sections.

Mark I Steel Helmet Pieces
Lot #12 of Iron Man Prop and Costume Auction

Production-made armor pieces made of steel. Set includes three pieces, one blank faceplate which measures 13½″ × 13″, one faceplate piece which measures 13½″ × 13″, and one cod ...

Mark I Steel Helmet Pieces
Lot #13 of Iron Man Prop and Costume Auction

Production-made armor pieces made of steel. Set includes three pieces, one upper part of the faceplate which measures 9″ × 14″, one lower face piece which measures 14″ × 4″, and ...

Mark I Steel Helmet Pieces
Lot #14 of Iron Man Prop and Costume Auction

Production-made armor pieces made of steel. Set includes two pieces, one upper part of the faceplate which measures 9″ × 14″, and one cod piece which measures 13¼″ × 9¼″. Edges are...

Mark I Steel Helmet Pieces
Lot #15 of Iron Man Prop and Costume Auction

Production-made armor pieces made of steel. Set includes two pieces, one slightly curved upper part of the faceplate which measures 9″ × 13¼″, and one cod piece which measures 13¼″ ×&...

Mark I Steel Helmet Pieces
Lot #16 of Iron Man Prop and Costume Auction

Production-made armor pieces made of steel. Set includes two pieces, one curved upper part of the faceplate which measures 9″ × 14¾″, and one cod piece which measures 8¾″ × 6¼″. ...

Hero Forged Mark I Mask
Lot #17 of Iron Man Prop and Costume Auction

Production-made sheet steel helmet face plate featuring a well hammered mouth section. Features hammer and anvil marks as well as heat scorching from use in the scene. Mask is made of two pieces of ...

Hero Mark I Mask from Desert
Lot #18 of Iron Man Prop and Costume Auction

Production made resin Mark I face mask (back piece included but was not used in scene) painted in varying metallic hues to simulate steel that has been heated and welded.

Mark I Torso from the Desert
Lot #19 of Iron Man Prop and Costume Auction

Production-made resin suit parts painted in varying metallic hues to simulate steel that has been heated and welded. Some pieces painted to simulate paint chipping. Nine armor pieces included which ...

Mark I Armor Right Hand Guard
Lot #23 of Iron Man Prop and Costume Auction

Resin hand guard split in two pieces, one upper and one lower section. Measures approximately 9½″ × 6¼″.

Mark I Iron Man Armor Butt Plate
Lot #24 of Iron Man Prop and Costume Auction

Production-made plastic plate painted beige with an art department sticker. Distressed to look worn and highly used. Measures 12¼″ × 11½″.

Hero Mark I Leg Segment from Cave
Lot #25 of Iron Man Prop and Costume Auction

Custom aluminum armature with geared teeth and rubber toothed belt drive. Belt is bolted to an air cylinder to actuate the belt back and forth. Item is painted to resemble weathered raw steel. Lower ...

Mark I Armor Suit Part from Desert Crash Site
Lot #26 of Iron Man Prop and Costume Auction

Production-made orange resin armor plate with “STARK D” stenciled on the front. Measures approximately 18″ × 7¾″.

Mark I Suit Parts from Tony’s Crash
Lot #27 of Iron Man Prop and Costume Auction

Production-made resin suit parts painted in varying metallic hues to simulate steel that has been heated and welded. Some pieces painted yellow with simulated paint chipping. Pieces vary in size.

Resin Mark I Suit Parts from Desert
Lot #28 of Iron Man Prop and Costume Auction

Production-made resin suit parts painted in varying metallic hues to simulate steel that has been heated and welded. Some pieces painted yellow with simulated paint chipping. Pieces vary in size.

Iron Monger Hero Helmet and Torso
Lot #29 of Iron Man Prop and Costume Auction

Production-made fiberglass torso with removable access panel with internal support beams and transport hook. Painted to look like slightly distressed steel. Torso measures 43″ × 44″ ×&...

Iron Monger Prototype Helmet
Lot #30 of Iron Man Prop and Costume Auction

Production-made fiberglass prototype Iron Monger helmet. Painted to look like steel. Item measures approximately 10″ × 13″ × 14″.

Iron Monger Prototype Helmet Distressed
Lot #31 of Iron Man Prop and Costume Auction

Production-made fiberglass prototype Iron Monger helmet. Painted to look like steel with scratches and holes from production on the face of the helmet. Item measures approximately 10″ × 13...

Iron Man Electro-magnet
Lot #32 of Iron Man Prop and Costume Auction

Screen used electro-magnet comprised of all metal components. Some wires have been clipped and removed. Item measures 3¾″ × 1½″.

Iron Man Hero Mark I RT Unit
Lot #33 of Iron Man Prop and Costume Auction

Screen used functional Mark I RT unit constructed of acrylic, brass and aluminum with functional wires and connector for power at the base. Item measures 3″ across and 2¾″ deep.

Iron Man Hero Mark II RT Unit
Lot #34 of Iron Man Prop and Costume Auction

Screen used functional Mark II RT constructed of acrylic, brass and aluminum with functional wires and connector for power at the base. Item measures 3″ across and 2¾″ deep.

Burned Out Iron Monger RT Unit
Lot #35 of Iron Man Prop and Costume Auction

Production-made Iron Monger Chest Piece made from custom machined aluminum sections with simulated scorching and burned electronics. Measures 7″ × 7½″ in diameter.

Test Harness RT Unit
Lot #36 of Iron Man Prop and Costume Auction

Screen Used aluminum bezel and sleeve with milk plex lens. Item measures 3″ across and 2″ deep.

Iron Monger Hero RT Unit with Cover
Lot #37 of Iron Man Prop and Costume Auction

Production Made/Screen used aluminum bezel and sleeve with milk plex lens. Backlit by aluminum heat sink with numerous led lights attached. Runs on 12 volts - remote sending and receiving unit s are ...

Hero Boom box from Humvee
Lot #38 of Iron Man Prop and Costume Auction

Plastic CD/Tape/AM-FM Radio boom box made by Trutech and painted silver by production. Exterior is weathered with tan and gray paint and mildly distressed. Measures 12½″ × 9¼″ × ...

Tony Stark Convoy Missile
Lot #39 of Iron Man Prop and Costume Auction

Production-made Tony Stark missile made of resin with machined aluminum winglet’s. Painted blue and black with white “Stark Industries” logo vinyl decals. Missile is covered in tan color dirt and dust...

Raza’s Hero Ransom Speech
Lot #40 of Iron Man Prop and Costume Auction

Production-made laser printed tan paper with weathering. Farsi writing is printed in gray tones to resemble pencil. Papers are folded in half and feature blue ink additions on one page along with blue...

Apogee Award from Ceremony
Lot #41 of Iron Man Prop and Costume Auction

Production-made Apogee Award made with an acrylic base, glass globe paperweight glued to top and custom brushed aluminum plaque. Inscription on plaque reads “62nd NAAE Apogee Award Presented to ...

Apogee Award from Casino
Lot #42 of Iron Man Prop and Costume Auction

Production-made Apogee Award made with an acrylic base, glass globe paperweight glued to top and custom brushed aluminum plaque. Inscription on plaque reads “62nd NAAE Apogee Award Presented to ...

Hero Stark Industries Wet Bar from Desert
Lot #43 of Iron Man Prop and Costume Auction

Production-modified stackable aluminum universal container made by Zargis. Features black vinyl Stark industries decal applied to the front and custom wood drink tray with VFX hardware (PVC Pipe) for ...

Hero Ice Bucket and champagne Bottle from Tony’s Bedroom
Lot #44 of Iron Man Prop and Costume Auction

Polished stainless steel double wall ice bucket with handle and clear glass “Cristal” champagne bottle with gold labels. Ice bucket measures 7″ × 8″ in diameter, bottle holds 750ml.

Tony Stark’s Hero Champagne Bottle
Lot #45 of Iron Man Prop and Costume Auction

Production-modified bottle of Dom Perignon Champagne. Bottle is empty but the top is sealed to look unopened. Bottle measures 12″ tall.

Pair of Seats from Tony’s Private Jet
Lot #46 of Iron Man Prop and Costume Auction

Production-made swivel seat constructed of a plywood and hardboard frame with foam padding and covered in tan simulated leather vinyl. Right arm features stainless steel faux button and lever. Seat is...

Curved Couch from Tony’s Private Jet
Lot #47 of Iron Man Prop and Costume Auction

Production-made curved couch constructed of a plywood and hardboard frame with foam padding and covered in tan simulated leather vinyl. Measures 93″ × 83″ × 33″.

Love Seat from Tony’s Private Jet
Lot #48 of Iron Man Prop and Costume Auction

Production-made loveseat constructed of a plywood and hardboard frame with foam padding and covered in tan simulated leather vinyl. Measures 78″ × 30″ × 36½″.

Leather Seat from Stark’s Private Jet
Lot #49 of Iron Man Prop and Costume Auction

Production-made swivel seat constructed of a plywood and hardboard frame with foam padding and covered in tan simulated leather vinyl. The seat does not have arm rests. Seat is mounted to a swivel ...

Pair of Seats from Tony’s Private Jet
Lot #50 of Iron Man Prop and Costume Auction

Production-made swivel seats constructed of a plywood and hardboard frame with foam padding and covered in tan simulated leather vinyl. Right arm features stainless steel faux button and lever. Seats ...

Hero Towel Serving Set from Tony’s Private Jet
Lot #51 of Iron Man Prop and Costume Auction

Wood serving tray with two cream hand towels and one polished stainless steel tong server. Tray measures 9″ x" 9″ × 1″.

Tony’s “Stark 6” Vanity License Plate
Lot #52 of Iron Man Prop and Costume Auction

Production-made California license plate made of white PVC vacuformed plastic. California name and plate numbers are silk screened with laser printed vinyl registration stickers. Measures 12″ ×&...

Yinsen’s Hero Laptop Computer
Lot #53 of Iron Man Prop and Costume Auction

Gray “Toshiba, Tecra” laptop computer heavily weathered by the Prop Department. Laptop does not function. Measures 11¾″ × 9″ × 2½″.

Yinsen’s Hero Shaving Kit
Lot #54 of Iron Man Prop and Costume Auction

Nickel plated “Merkur Solingen” adjustable safety razor with ivory colored adjustment screw. Faux weathering applied by Prop Department and features shaving soap residue from filmed scene. One badger ...

Yinsen’s Hero Stopwatch
Lot #55 of Iron Man Prop and Costume Auction

EAI silver stop watch. Measures 2¾″ × 2″ × ¾″.

Yinsen’s Hero Backgammon Board
Lot #56 of Iron Man Prop and Costume Auction

Production-made backgammon board made of hand-carved wood pieces, plywood and galvanized sheet steel backing. Includes weathered nuts and washers used as chips, casting pot used as dice cup and two ...

Hero Casting Sand and Bowl
Lot #57 of Iron Man Prop and Costume Auction

Large wood bowl with casting sand and stoneware cup with palladium ring impression in casting sand. Includes one palladium ring made of aluminum. One half gallon can of instant casting sand. Wood bowl...

Hero Palladium Ring Casting Tools
Lot #58 of Iron Man Prop and Costume Auction

Stoneware cup with palladium ring impression in casting sand, metal casting pot, faux molten palladium in glass jar. Includes one palladium ring, one aluminum mould impression ring, two glass ...

Palladium Ring Casting Tools
Lot #59 of Iron Man Prop and Costume Auction

Stoneware cup with palladium ring impression in casting sand, and metal casting pot. Includes one palladium ring, one aluminum mould impression ring. Cup measures 2″ × 4″ in diameter. ...