Propworx

Data Disc
Lot #1 of Star Trek

Production-made rectangular piece of wood painted orange. One edge is beveled and the opposite edge is slightly rounded. Measures 3" x 3.5"

Spock's Prosthetic Vulcan Ear Appliances
Lot #2 of Star Trek

Production-made foam latex appliances painted to match actor's skin tone. Also present on one era is a small strip of adhesive left over from production use. Each ear tip measures approximately 1.5" x...

Original Series Monitor Graphic
Lot #3 of Star Trek

Production-made Translight on film depicting side and top view of the Enterprise with the words "Hull Pressure Comp'ts" in the top left corner. This item consists of multiple layers, the first of ...

Original Series Command Insignia
Lot #4 of Star Trek

Production-made black and gold insignia made from a gold leatherette material with black embroidered edge and star logo in the center. Item measures 1¾" x 3".

Sulu Tunic
Lot #5 of Star Trek

Production-made tunic in avocado polyester with black color. Zipper runs from the left side of the collor down the seam just in front of the left arm and down the side. A subtle stitching pattern can ...

Kohm Jacket
Lot #6 of Star Trek

Production-made quilted, violet colored jacket with two pockets which are trimmed with black embriodery. The same embroidery was used to make the knot and loop fasteners that keep the jacket closed in...

Third Season Original Recordings
Lot #7 of Star Trek

Production-made reel to reel tapes containing natural stage sound from the filming of five "Original Series" episodes. Each reel remains in it's original box complete with notes written on the outside...

Young Spock Original Animation Cels
Lot #8 of Star Trek

Production-made animation cels depicting a young Spock. One cel is of a standing figure while the other three are part of a walking sequence. Four cels are present and measure 12" x 10".

Star Trek Poster Book Original Art
Lot #9 of Star Trek

Original camera-ready art by Doug Drexler in blue line and ink with the text "Star Trek Giant Poster Book ... on sale these coordinates ..." at the top and the pictures of Kirk and Spock at the bottom...

Enterprise-E Dedication Plaque
Lot #10 of Star Trek

Production-made plaque made with plastic face backed with PVC. Painted to look bronze with raised border and letters painted gold. Measures 14" x 10".

Kirk Space Suit Model
Lot #11 of Star Trek

Production-made figure in space suit with fully poseable internal metal armature. Legs, arms and body sides are foam latex painted off-white and burgundy. Helmet and main body are cast resin painted ...

Starship Enterprise Study Model
Lot #12 of Star Trek

Study model made from wood and plastic, painted white, with hand-applied tape and ink details. There is some evidence of repairs where the nacelle pylons meet the secondary hull. Measures 15" long and...

"The Motion Picture" Klingon D-7 Prototype Special Effects Model
Lot #13 of Star Trek

Production-made model made of fiberglass painted light green with hand painted insignias and details on both sides. There are also numerous windows painted on the surface. A repair is present just ...

Cargo Container Model from Star Trek V Shuttle Bay
Lot #14 of Star Trek

From Felisium to Hytritium to Peradom, the USS Enterprise is always carrying some form of cargo. This and other small scale containers were used throughout the production of TNG to dress miniature ...

Enterprise-D Model Fragment
Lot #15 of Star Trek

Production-made fiberglass fragment with frayed edges, elongated window opening and raised paper details. Painted a light greenish grey on one side and measures 6⅕" x 2¾".

Set of Vulcan Ceremonial Spears
Lot #16 of Star Trek

Two elaborately carved spears with simulated jewel ornaments and gold-colored finish. Each measures 8' long.

Ceti Eel Plaster Cast
Lot #17 of Star Trek

Production-made plaster casting of Ceti eel directly from original hand puppet mold. Some small pieces have broken off over time but otherwise in excellent condition. Measures 5" x 11"

Starfleet Insignia Pin - TWOK through Generations
Lot #18 of Star Trek

Production-made brass Delta with circle insignia. Aged brass with two pin backs. Measures 1¾" x 2¼".

Dom Perignon Label
Lot #19 of Star Trek

Unused production-made label. Printed in black with antiqued sepia background on paper. Reverse side is the same label printed on white laminated paper. Small pinholes are present at top. Measures 3¾...

Battlestar Galactica Metal & Paper Cubits
Lot #20 of Battlestar Galactica: The Airlock Auctions

Gold cubit contains the Colonial phoenix and ring symbol on one side, with the Caprica symbol on the other side of the gold cubit and the Scorpia symbol on the other side of the silver cubit. Paper ...

Starfleet Communicator Badge
Lot #20 of Star Trek

Communicator badge made from cast resin, painted gold and silver with Velcro backing. Hand lettering on back indicates this is badge #57. Measures 2" x 1¾".

Battlestar Galactica Metal & Paper Cubits
Lot #21 of Battlestar Galactica: The Airlock Auctions

Gold cubit contains the Colonial phoenix and ring symbol on one side, with the Caprica symbol on the other side of the gold cubit and the Scorpia symbol on the other side of the silver cubit. Paper ...

BSG Props Full Set Cubits & Pyramid Card
Lot #21 of Battlestar Galactica: The “33” Auctions

Metal cubits contains the Colonial phoenix and ring symbol on one side, with the Caprica symbol on the other side of the gold cubit and the Scorpia symbol on the other side of the silver cubit. The ...

Oscillation Overthruster
Lot #21 of Star Trek

Resin painted silver resin casting with many facets and semi-round surfaces. Some round detail pieces are present and measures 3" x 2" x 2.5".

Battlestar Galactica Metal & Paper Cubits
Lot #22 of Battlestar Galactica: The Airlock Auctions

Gold cubit contains the Colonial phoenix and ring symbol on one side, with the Caprica symbol on the other side of the gold cubit and the Scorpia symbol on the other side of the silver cubit. Paper ...

BSG Props Set of Gold and Paper Cubits
Lot #22 of Battlestar Galactica: The “33” Auctions

Gold cubit contains the Colonial phoenix and ring symbol on one side and the Caprica symbol on the other side. The 500-cubit bill is two sided with a blue color scheme, includes a reference to the “...

Observation Lounge Model of TOS Enterprise
Lot #22 of Star Trek

Gold plated model of TOS Enterprise cast possibly in resin. A threaded post extends from the secondary hull and some damage to nacelle pylons and evidence of past repair. Measures 9½" x 22".

BSG Props Set of Silver and Paper Cubits
Lot #23 of Battlestar Galactica: The “33” Auctions

Silver cubit contains the Colonial phoenix and ring symbol on one side and the Scorpia symbol on the other side. The 100-cubit bill is two sided with a green color scheme, includes a reference to the...

Enterprise-B Bridge Stanchions
Lot #23 of Star Trek

Two production-made railing supports made from metal and wood. There is an endcap present on each support but they are not connected. Items measure 39" x 7" x 5".

Enterprise-E Master System Display Graphic Translite
Lot #24 of Star Trek

Production-made translite graphic printed on two sheets of backlit film. Both sheets fit together to complete the internal schematic of the Enterprse-E and measures 35" x 18".

Viewscreen Internal Workings Translite
Lot #25 of Star Trek

Production-made translite on film depicting the internal workings of the viewscreen-used by Soran in the feature film "Generations". This item consists of multiple layers, the first of which is a ...

Amargosa Observatory Translite
Lot #26 of Star Trek

Production-made translite graphic printed on backlit film depicting numerous control panels and a large display area. Measures 55" x 22½".

Soran's Panel From Missle Launcher
Lot #27 of Star Trek

Production-made black acrylic panel with screen printed graphics in green, blue and red with gold vinyl details. Also present are plastic domes and faux buttons. Measures 25" x 11½".

Button Panel from "The Motion Picture"
Lot #28 of Star Trek

Production-made button panel consisting of black acrylic with screen printed button graphics in light green with white border. Has medium set wear and measures 1¾" x 5".

Son'a Button Panel
Lot #29 of Star Trek

Production-made button panel made of acrylic with resin cast knobs painted bronze and metallic red with vinyl graphics. Measures 3½" x 9".

Star Trek V Nimbus III Native Gun
Lot #30 of Star Trek

Non-functioning prop made of metal piping and parts, with a nylon strap. It measures 35" in length.

Turbolift Door Sign
Lot #31 of Star Trek

Production made vinyl label silkscreened with the "turbolift" symbol in light gray on a medium gray background. Measures 12" x 13".

Grissom Young Bar Sign
Lot #32 of Star Trek

Production made round Grissom Young sign consisting of red and black printed vinyl mounted on black foam core. One piece of black double stick foam remains on back from poduction. Item measures 24" in...

Engineering Door Sign - Enterprise-E
Lot #33 of Star Trek

Production-made sign consisting of a 2 piece melamine backing with brushed gold background and brown vinyl lettering. "Nemesis Delta" and "16 Engineering" on front and evidence of adhesive on back are...

Khan's Navigator Costume Components
Lot #34 of Star Trek

Production-made costume consisting of foam rubber face mask and neoprene glove covered in blue cloth, crme colored shirt and three extra strips of fabric with grommets attached. All pieces are ...

Reman Warrior Costume
Lot #35 of Star Trek

The Reman costumes were the most elaborate and detailed costumes ever produced for Star Trek. Truly spectaular in person, they are made of leather, plastic, vinyl and cloth. The costume consists of a ...

Environmental Engineering Suit
Lot #36 of Star Trek

Starfleet environmental engineering suit consisting of a heavy cotton jumpsuit with front and back attached gear made of plastic. The costume includes a helmet and boots and is in overall excellent ...

Klingon Warrior Costume
Lot #37 of Star Trek

A full Klingon costume, originally sold as lot # 905 in the Christie's 2006 Star Trek auction. The costume is complete with leather tunic with faux fur sleeves, leather belt, gorget, gauntlets and ...

Doug Drexler Paramount Star Trek IX Photo ID
Lot #38 of Star Trek

Star Trek IX Cast and Crew ID badge with chain. Printed on laminated card stock with Voyager style insignia on front and photo of Doug Drexler on reverse. Measures 2.25" x 3.75".

Battlestar Galactica Paper Cubits
Lot #39 of Battlestar Galactica: The Airlock Auctions

Paper cubits are two sided with a blue color scheme for the 500 bill, the paper cubit includes a reference to the “Seventh Millennium of Time” (a nod to the original series) and features the symbols ...

Technicolor "Silent 820" 8mm Loop Projector
Lot #39 of Star Trek

Silent 820 8mm film projector manufactured by Technicolor. Projector appears to be complete but is untested. Also includes parts of an incomplete second projector and one 8mm loop cartridge.

Assorted Enterprise-B Danger Labels
Lot #40 of Star Trek

Six production-made unused warning labels, silkscreened blue on silver vinyl and red on orange vinyl. The blue and silver labels are all identical and are mounted on PVC backing while the yellow and ...

V'Ger Concept Sketches
Lot #41 of Star Trek

Three hand-drawn pencil drawings on vellum. Drawings are aged and damaged. Each measures approximately: 18.75" x 24".

TMP Original Concept Drawings
Lot #42 of Star Trek

Production-made concept artwork depicting various concepts for a starbase and various interiors. The large image is a blueprint reproduction. One of the smaller images is also a copy while the other ...

"Enterprise-E Enters Briar Patch" Original Artwork
Lot #43 of Star Trek

Production-made artwork by John Eaves depicting the Enterprise-E entering the "Briar Patch" from the feature film Insurrection and is comprised of pen and ink line art with guache and colored marker. ...