Propworx

Starship Enterprise Study Model
Lot #12 of Star Trek

Study model made from wood and plastic, painted white, with hand-applied tape and ink details. There is some evidence of repairs where the nacelle pylons meet the secondary hull. Measures 15" long and...

"The Motion Picture" Klingon D-7 Prototype Special Effects Model
Lot #13 of Star Trek

Production-made model made of fiberglass painted light green with hand painted insignias and details on both sides. There are also numerous windows painted on the surface. A repair is present just ...

Enterprise-D Model Fragment
Lot #15 of Star Trek

Production-made fiberglass fragment with frayed edges, elongated window opening and raised paper details. Painted a light greenish grey on one side and measures 6⅕" x 2¾".

Cylon Baseship Corridor Model
Lot #39 of Battlestar Galactica: The Last of the Best

Made from quarter inch black foam core board, black card stock and frosted plastic sheeting. Model is held together with pins and glue. Measures 21″ × 16″ × 9″.

Galactica Central Hub Model
Lot #40 of Battlestar Galactica: The Last of the Best

Made from quarter inch white foam core board, with blue print schematics glued to one side of board sections to add detail to the model. Model is held together by pins and glue. Features four opening ...

Shuttlecraft Nenebek Model
Lot #73 of Star Trek

Production-made model made out of presentation board with styrene accents. Painted brick-red with black on the windows. Features a mounting hole on the bottom for filming. Model measures: 18" x 7.5" x...

Nebula Alternate Pod
Lot #76 of Star Trek

Production-made model primered dark grey and made from acrylic, metal and styrene. Two horizontal triangular blades are joined at the center by a single pod and sit on an angled tower, both are ...

Temple of Aurora Foam Core Model
Lot #82 of Battlestar Galactica: Creating the Legend

This is the foam core model of the Temple of Aurora seen in Season 4’s “Revelations,” when the Galactica finds Earth. 20½″ × 25″ × 5″. Model is of foam core with clay pillars.

Hangar Deck Set Foam Core Model
Lot #83 of Battlestar Galactica: Creating the Legend

A huge foam core model used to create the Hangar Bay set for Galactica. The model has a 2D Mk VII Viper and measures 28″ × 29½″ × 8″. Includes two sets of benches to resemble the ...

Armistice Station Foam Core Model
Lot #84 of Battlestar Galactica: Creating the Legend

A foam core model of Armistice Station, done in black foam core. The model is approximately 20″ × 11″ wide. It has two sets of doors that open and close.

Main Hub Foam Core Model
Lot #85 of Battlestar Galactica: Creating the Legend

The main hub of the Galactica set was seen in numerous scenes because of its variety and access to different sets, allowing a director to shoot long shots in one set, through the hub, and into ...

Cylon Baseship Foam Core Model
Lot #86 of Battlestar Galactica: Creating the Legend

This model shows the entire set of the Cylon Baseship interior as built on Stage “D” of Vancouver Film Studios. The set took up the entire stage, and this model shows the length of that stage in ...

Launch Bay Foam Core Model
Lot #87 of Battlestar Galactica: Creating the Legend

A foam core set model of the Launch Bay with control room attached, showing the layout of the set, including the launch bay control room window looking onto the launch tube. Model measures 12″ ...

Demetrius Foam Core Model
Lot #88 of Battlestar Galactica: Creating the Legend

A very impressive and detailed foam core set model showing the various parts of the Demetrius, the garbage ship assigned by Adama to Starbuck so she can follow her intuition and find Earth. The model ...

Launch Tube Foam Core Model
Lot #89 of Battlestar Galactica: Creating the Legend

This lot contains two separate foam core models of the Viper launch tube. Two separate pieces of the launch tube. One part has a movable blast door. The two pieces actually fit together, though may ...

Cylon Baseship Foam Core Model
Lot #90 of Battlestar Galactica: Creating the Legend

This is the set model for the interior of the Cylon Baseship in “Kobol’s Last Gleaming Part II” when Sharon finds out she is a Cylon. The model features a miniature Raptor and is made of foam core ...

CIC Foam Core Model
Lot #91 of Battlestar Galactica: Creating the Legend

This is the foam core set model built to show the producers what the CIC would look like. It measures 17″ × 20″ × 7″ and has all the features that are now familiar to Galactica ...

Asteroid Filming Miniature
Lot #124 of Star Trek

Production-made foam and resin painted gray and weathered to look like stone. Mounted on a metal pole for filming. Asteroid measures 10" x 13", with pole length is 31" in length.

Miniature Turbo Lift Panel Master and Mold
Lot #125 of Star Trek

Production-made styrene miniature model on foam core and cardboard backing. A silicone mold made from this piece is also present and shows signs of heavy use although all details are present. Master ...

Deep Space Nine Station Model Pieces
Lot #126 of Star Trek

Production-made model fragments made of styrene, acrylic and break-away wax. Parts are from the main docking ring, defensive sail, main fusion reactor and power transfer conduits. Pieces vary in size ...

U.S.S. Defiant Model Filming Miniature
Lot #127 of Star Trek

Production-made raw resin casting of a spaceship with a high level of detail. The bottom has pencil markings but is otherwise in excellent condition and measures 6.25" x 8".

Klingon Bird of Prey Explosion Model
Lot #128 of Star Trek

Production-altered store bought styrene model painted gray and dusted with green and copper to look weathered. The tip of one wing is missing but otherwise intact. Measures 12" x 10" x 6".

Quark's Bar Study Model
Lot #161 of Star Trek

Production-made study model of made from foam core and some metal parts with images printed on one side. Slightly dusty from storage. Measures 16" x 11" x 10".

K-7 Bar Study Model
Lot #175 of Star Trek

Production-made model made from foam core and paper with color images printed on one side. Slightly dusty from storage. Measures 16.5" x 14.5" x 3".

Starship Voyager Hull Marking Graphics
Lot #207 of Star Trek

Art department created decals featuring graphics for the U.S.S. Voyager. The decals include: "U.S.S. Voyager," "NCC-74656" and various colored graphics. Three sheets measure 8.5" x 11", the fourth ...

Incredible Hulk Gamma Ray Device Model
Lot #218 of Sci-Fi Auction

Production-made model made of paper and white foam core board, with black print schematics glued to the side of the board sections to add detail to the model. Model is held together with glue. ...

NX-01 Bridge Study Model
Lot #256 of Star Trek

Production-made bridge model made from foam core with images printed on one side. Main viewscreen and canopy are separated from the main MDF base. Dusty from storage. Measures 11" x 14 and 3" tall ...

NX-01 Mess Hall Study Model
Lot #257 of Star Trek

Production-made study model made from foam core with images printed on one side. One side of the model is open for easy view from the inside out. Dusty from storage. Measures 11.5" x 11.5" x 4.5".

NX-01 Shuttle Pod Study Model
Lot #258 of Star Trek

Production-made rigid foam model used for design work. Features plastic canopy and docking ring. Some surface wear is present. Measures 10" x 4" x 3"

Future Time Ship Study Model
Lot #259 of Star Trek

Production-made model made from wood and mat board, painted white. Stand is attached to base and measures 5" x 14".

Orion Bridge Viewscreen Study Model
Lot #260 of Star Trek

Production-made bridge viewscreen model made from foam core and paper with images printed on one side. Dusty from storage. Measures 6" x 9".

NX-Alpha and Sled Study Model
Lot #261 of Star Trek

Production-made of wood painted white on sled made of foam core and styrene with technical drawings on the surface. NX Alpha is detached from sled. Dusty from storage and measures 11.5" x 6.5" x 5".

NX-01 Corridor Study Model
Lot #262 of Star Trek

Production-made corridor model made from foam core with images printed on one side. Three pieces along the base boards are removable. Measures 10" x 15.5" x 7.5".

Suliban Escape Pod Study Model
Lot #263 of Star Trek

Production-made model constructed with foam core, images printed on both sides with numerous sides and openings on each. The side panels are held in place with clips so they can be easily removed to ...

Enterprise-D Saucer Panel # 1
Lot #274 of Star Trek

Panel is made of fiberglass and measures 46" x 30". Painted light blue and gray with raised panels, etched lines and cut out recessed windows for detailing. The panel is in excellent condition with ...

Enterprise-D Saucer Panel # 2
Lot #275 of Star Trek

Panel is made of fiberglass and measures 46" x 30". Painted light blue and gray with raised panels, etched lines and cut out recessed windows for detailing. The panel is in excellent condition with ...

Enterprise-D Saucer Panel # 3
Lot #276 of Star Trek

Panel is made of fiberglass and measures 52" x 30". Painted light blue and gray with raised panels, etched lines and cut out recessed windows for detailing. The panel is in excellent condition with ...

Enterprise-D Saucer Panel # 4
Lot #277 of Star Trek

Panel is made of fiberglass and measures 52" x 30". Painted light blue and gray with raised panels, etched lines and cut out recessed windows for detailing. The panel is in excellent condition with ...

BSG Cylon Baseship Foam Core Model
Lot #976 of Battlestar Galactica eBay Sale

This is the foam core model made for the sets that were used for the interiors and rooms of the Cylon Baseship, which are first seen in Season Three. This denotes two multi-purpose rooms, the circular...

BSG New Caprica Settlement Model
Lot #1848 of Battlestar Galactica eBay Sale

Production-made model made of balsa wood, cardboard and gray paper mounted to foam core board. Model is weathered and shows some damage from use on set and storage at Vancouver Film Studio props lock-...